← Resources

Buying an exhibition lightbox: the complete guide

An exhibition lightbox has three parts: an aluminium frame, LED lighting and a printed fabric. Price gaps come from the profile, the lighting, the fabric, where it is made and what the price includes. So always compare the same size, with print, design and shipping counted in.

Every show floor has lightboxes that look crisp and bright next to ones that look grey and patchy, though both carry the same name on a quote. This guide explains where the difference sits, and what to ask before you buy.

What an exhibition lightbox is

An exhibition lightbox, also called a fabric lightbox or LED exhibition wall, is an aluminium frame with a printed fabric pulled tight inside it. The fabric has a thin, flexible strip sewn to its edge, which you press into a groove in the profile; the trade calls this SEG. LED lighting sits behind or beside the fabric, so the image glows from within.

The big advantage over a printed banner or a board: the light comes from behind. Colours stay saturated, even in a brightly lit hall.

The types side by side

The fabric lightbox with a push-in edge is the standard at shows: light, demountable, and the fabric can be washed and replaced.

A lightbox with film or an acrylic sheet is made for permanent use, such as in a shop or showroom. It is stiffer and heavier, and changing the image takes more work. For a stand you build several times a year, that is rarely practical.

A pop-up wall is a folding scissor frame with printed panels in front. It needs no power and goes up quickly, but looks flatter in a dark hall. A fabric frame without lighting is the same aluminium frame and fabric, without LEDs: calm and cheaper, as long as the hall is bright enough.

Edge-lit or backlit

In an edge-lit box, LED strips run along the inside of the profile and a light guide plate or diffuser spreads the light across the surface. That allows a slim profile, but on large surfaces the centre soon turns darker than the edges.

In a backlit box, LED strips or modules sit behind the fabric, spread across the whole surface. That needs a deeper profile, but gives a more even image on large walls. Ask every supplier which of the two it is, and how deep the profile is: the deeper, the more room the light has to spread.

Single or double-sided

If the wall stands against the back of your stand, single-sided is enough. The fabric then has a light-blocking back, so no light leaks out on the wrong side. If the wall stands free in the space, as a divider or on an island stand, choose double-sided: both sides are printed and both glow.

The fabric: material, print and fire rating

The usual fabric is backlit polyester printed by dye sublimation. The ink goes into the fibre, so colours do not flake off and the fabric can be folded without cracking the print. For single-sided walls the fabric has a blockout layer on the back.

Always ask for the fire rating. Most shows require a flame-retardant fabric to B1, M1 or EN 13501, depending on the country. Ask for the certificate of the exact fabric you will receive, not of a similar material. Our fire safety guide explains which standard applies where.

The frame

Check three things. One: is the frame modular and tool-free, or does it need screws and a second person? Two: how does it stand, on feet, against a wall or hanging? Three: does it fit packaging you can lift and transport? A frame that only travels on a pallet needs different planning from one in a case.

The lighting

Ask for light output per square metre, not only the total. More is not always better: too much light washes out the image, too little makes it grey. Evenness counts for more than the peak figure. Also ask for the colour temperature and whether the power supply suits the connection at the show. Our lumen guide gives the rules of thumb.

Why prices vary so much

Five things explain almost every price gap. Profile and lighting: aluminium wall thickness, number of LED strips, quality of the power supply. Fabric and print: material, sublimation or cheaper print, fire certificate. Origin and lead time: a wall made in the EU within days costs more than one made to order in Asia and shipped. Duties and VAT: are they in the price, or due on delivery? And what is included: design, transport case, shipping and help with set-up.

A low price without the print, without shipping or without duties is therefore not a low price. Only compare quotes once they cover the same things.

Buy or hire

If you exhibit once a year, hiring is usually cheaper. From two shows a year, buying pays back: the frame and lighting stay with you, and for each campaign you only replace the fabric.

Ten questions for every supplier

Which size exactly, and does it fit the inner width and build height of my stand? Edge-lit or backlit, and how deep is the profile? Single or double-sided? Which fabric, which print, which fire certificate? Is design included? Is the transport packaging included? Are shipping, duties and VAT included? What is the lead time, and is that a maximum or an average? Can I order just a new fabric later? Can I hire instead?

The parts of a lightbox, one by one

A lightbox looks like one product, but it is made of a handful of parts, and each one decides the quality. The profile is the aluminium frame, with a groove at the front that holds the fabric. The corner connectors keep the profiles square; on cheap frames, that is where the first play and the first crooked corners appear. Wide walls add middle struts, so the profile does not bow under the tension of the fabric.

Inside sit the LED strips or LED modules, the wiring and a power supply that turns mains voltage into the low voltage the LEDs need. At the bottom are feet or supports, so the wall can stand free. And then the fabric itself, with the edge that goes into the groove. Feel free to ask a supplier for a photo of the inside of the frame: anyone proud of how it is built is happy to show it.

Which size to choose

The size of the wall follows the size of the stand. For a 3 × 2 or 3 × 3 metre stand, a 300 cm wide back wall is the standard. For a stand 4, 5 or 6 metres wide, choose a wall of the same width so you get one continuous image. The height is usually 250 cm, unless the show sets a lower build height.

Always measure the inner width. With the organiser's shell scheme, the partition walls take up a few centimetres, and a wall that fits on paper then just does not fit. The maximum build height is in the exhibitor manual.

Layouts: straight wall, corner and island

The straight back wall is the most common layout: one wall against the back of the stand, printed on one side. A corner stand has two open sides and two walls; put the largest wall at the back and a narrower one on the closed side. On an island stand, walls stand free in the space. Choose double-sided there, because visitors walk past on every side.

If you often exhibit at shows with different stand sizes, two 300 cm walls work better than one 600 cm wall. On a small stand you put up one, on a large stand two side by side or in a corner. That way you do not pay for a wall that does not fit at half your shows.

Design: sharp, legible and well lit

A lightbox amplifies everything in the design, mistakes included. Design for distance: visitors see your wall from five to ten metres away while they keep walking. Put your logo and one key line in the top part of the wall, because the bottom part disappears behind the counter and the people on the stand. Use large type and strong contrast, and keep the text to one message.

Light areas glow brightest through the fabric; large dark areas let little light through. Use high-resolution images, because a photo that is sharp on your website turns grainy at three metres wide. Our artwork guide gives the exact requirements for resolution, bleed and colour profile.

Lead time and planning

Lead times vary widely. A wall made in the EU from stock or at short notice can reach you within a few working days. A wall made to order in Asia and shipped needs several weeks. Between the two there is often a clear price gap, and you pay that gap only for time.

Count back from the first day of build-up, not from the opening of the show. Add the longest lead time, then one more week for design and approval of the proof. Around public holidays, days off do not count as working days.

Transport and delivery: why not straight to the hall

Many venues do not let couriers onto the show floor. Parcels are held at a central reception point, and transport to the stand goes through the venue's appointed forwarder, at its own rate. A wall sent to the hall therefore often costs extra and does not always reach the stand on time.

So have the wall come to your own address and take it to the build-up yourself. Ask every supplier how the wall travels: in a case you can carry yourself, or on a pallet that needs a forklift or a tail lift. Our venue delivery guide compares the rules and rates of RAI Amsterdam and Messe Düsseldorf.

Build-up and take-down

A good system goes up without tools and without a specialist crew. The order is nearly always the same: lay out the profiles, push the frame together, fit the feet, stand the frame up, press the fabric into the groove and plug it in. Start the fabric at the corners and work towards the middle, and it sits tight without creases.

Build the wall once at the office before you go to the show. Then you know how long it takes, whether every part is there and who does what. Work with clean hands or gloves so the fabric does not get marks. At take-down, everything goes back into the packaging in reverse order, with the fabric loosely folded.

Care, cleaning and storage

A polyester fabric is usually washable; always follow the supplier's care instructions, because washing or ironing too hot can damage the edge or the print. Light marks often come off with a damp cloth and a mild cleaner. Check the cables, the plug and the LEDs before every show, so there are no surprises on the stand.

Store the frame and fabric dry and dust-free, with the fabric loosely folded or rolled in a sleeve. A transport case keeps everything together, so the next show starts with opening one case rather than hunting for parts.

Sustainability

A lightbox is one of the most reusable parts of a stand. The aluminium frame and the lighting last many shows; for a new campaign you replace only the fabric. Compared with a stand that is thrown away after each show, that saves a lot of waste and transport. Aluminium is also easy to recycle at the end of its life.

Eight mistakes we often see

One: ordering a wall to the stand size instead of the inner width. Two: not ordering a power connection from the show. Three: too much text on the wall. Four: not asking for the fabric's fire certificate. Five: ordering too late and then paying for express. Six: having the wall sent straight to the hall. Seven: putting a single-sided wall free in the space. Eight: comparing quotes that do not cover the same things.

Each of these mistakes costs money or stress at build-up, and each can be avoided with one question asked in time. The ten questions below catch them all.

Terms in brief

SEG: a system where a fabric with a flexible edge is pressed into a groove in the profile. Keder: that flexible edge on the fabric. Blockout: a light-blocking layer on the back of a single-sided fabric. Dye sublimation: a print method where the ink goes into the fibre. Edge-lit: LEDs along the edge of the profile, with a plate that spreads the light. Backlit: LEDs across the whole surface behind the fabric.

Lumen: the amount of light the LEDs give. Colour temperature: how cool or warm the light is, in kelvin. B1, M1 and EN 13501: fire classes from different countries. DDP: delivery with duties and shipping included, so you pay nothing on delivery. Inner width: the real space between the walls of your stand.

Frequently asked questions

How long does a lightbox last? With normal use, the frame and lighting last many shows; you replace the fabric when your campaign changes. Can I use a lightbox outdoors? Most exhibition lightboxes are made for indoor use; ask the supplier if you want to stand outside. Can I later put a fabric of another size in the same frame? No, the fabric is made to the size of the frame.

Do I need a designer? Not necessarily. Many suppliers, us included, fill in a template with your logo and text. How do I compare two quotes? Put size, lighting, fabric, design, packaging, shipping, duties and lead time side by side, and only then compare the price.

Lightbox or LED screen?

An LED screen can show moving images, a lightbox cannot. On the other hand, a screen costs many times more per square metre, uses more power, runs warmer and needs content that someone has to make and play. A lightbox shows one strong image, equally bright all day, without a computer or media player.

Many exhibitors combine the two: a lightbox as the back wall for the brand, and a single screen on the counter or a column for a product video. That way you only pay for moving images where they add something.

Lit counters, columns and other shapes

The same principle as the back wall comes in other shapes: a lit counter, a column or totem, a cube or a wall around a corner. They usually use the same profiles, lighting and fabrics. If you start with a back wall, you can extend the stand later without replacing everything. Ask every supplier whether the parts come from the same system, so the colour of the light matches.

Light and colour in the hall

Exhibition halls are usually lit cool and bright, sometimes with daylight through a glass roof. A lightbox with warm white light soon looks yellowed in that light; cool daylight fits better. So ask for the colour temperature, and bear in mind that bright spotlights above your stand light the wall from the front and reduce the contrast between light and dark in your design.

Our lumen guide explains how much light a wall needs to stand out from the hall, and why more is not always better.

Warranty and service: what to ask

LEDs and power supplies are the parts most likely to fail first. So ask what warranty covers the lighting and the power supply, and whether single parts can be reordered: a power supply, a corner connector, a foot. Also ask whether you can later order a new fabric in the same size, even if the frame model has changed in the meantime.

A supplier that answers these questions quickly and concretely is usually also the supplier that helps you when something goes wrong at build-up.

Buying in seven steps

One: measure the inner width and look up the build height. Two: choose the size and whether you need single or double-sided. Three: decide to buy or hire, based on how many shows you do a year. Four: count back from build-up and choose standard or express. Five: supply your artwork or have the template filled in.

Six: approve the proof. Seven: order the power connection from the show organiser, and build the wall once before you go to the show. Follow this order and build-up holds no surprises.

What a stand costs over five years

When you buy, do not look only at the first show. A bought wall costs the purchase price once, then a fabric for each new campaign. Hiring costs the hire price at every show. A stand builder charges design, materials, transport and assembly at every show.

If you do two shows a year for five years, buying means one wall and a handful of fabrics, hiring means ten times the hire price, and a stand builder means ten complete stands. That is why exhibitors who show regularly nearly always choose their own system.

What it costs at ExpoLightbox

An LED exhibition wall costs from €1,075 excl. VAT to buy and from €600 per show to hire. Frame, LED lighting and printed fabric are included, and so is filling in our template with your logo and text. The price list shows every size, and the configurator prices your own wall.